Когда требуется выбрать качественную и надежную вытяжку, то все специалисты настоятельно рекомендуют останавливать выбор в пользу проточных вытяжных систем. Thanks to a large pure umbrella and a steel duct, all combustion products are quickly removed from the kitchen space to the surrounding atmosphere.
But in order for the hood to develop its high rated power, and the engine does not overheat, you need to pay attention to the main component – a competent installation.
Description of the article:
First of all, for a running hood, it is necessary to knock out the necessary technological hole from the load -bearing wall of the house. For such a case, a portable electric perforator is widely used, which is available to masters. With it, you can only knock out the hole of the desired diameter within one hour so that the steel section of the duct can easily pass inside.
As soon as the technological hole turns out to be ready, there is a turn of installation of the main element – an exhaust umbrella.
For such cases, anchor bolts are widely used. At first, the masters are cut out, again with the help of an electric perforator, the right number of holes, then an exhaust umbrella is installed on the seat, and then it is screwed into its rightful place with the help of reliable trouble -free anchor bolts.
Heavy hood
You can be sure that even the most heavy hood – dome – will sit reliably in its landing place.
If you select an easier version of the hood, then to install an exhaust umbrella, it is quite possible to choose an option with a shooter, t. e. when a building powder pistol and steel dowels are used. If the dowel is high -quality – black, t. e. Russian production, then the question – withstand the hood of its own weight or not – will not stand in principle.
Steel sections
After installing an exhaust umbrella, the steel sections of the duct are collected together. The main thing here is that you need to look at those arrows that will show the correct direction of the outgoing gases. If you confuse the arrows, then the balance of circulation is violated and the power of the entire exhaust system, even with a powerful engine, will be at the minimum level.
But if everything is assembled correctly, then the masters are connected to the electricity, carry out the final test (the engine and lighting are checked), and if everything works at the standard level, then the hood is finally surrendered to the customer.