Material for a frame-chip house can be different. If your choice is metal, then it is unlikely that it will be possible to save, metal is quite expensive material. In addition, you will need a welder’s services, here you will also take care that such a frame does not draw a cold, creating the so -called “cold bridges”. The choice for the basis of the frame – wood also does not promise great savings, t. To. In the frame “sandwich” it will also turn out to be a lot. Most often, such a wall frame is made of a beam of 50 × 100 and with a step of 75 cm. The lags themselves, the upper and lower strapping of the log house are also made from the beam, in size 100 × 150 cm.
Interest for the sake, calculate how many wood will go to assembly of your walls. The voids between the timber will be filled with a heater, in addition, remember that you will have to take care of moisture-paramino. External and internal wall sheathing will also entail the cost of material. In addition, the frame of the frame type necessarily needs internal and external decoration. It will be necessary to think over the placement of the dew point, carry out competent intrasthen ventilation of the facade. All this is not at all easy, even when the plan of the house is made by a good architect.
When buying building materials, a person of medium wealth, but dear to his health, often has to look for a compromise between cheap and environmentally friendly analogues and environmentally friendly, and therefore expensive materials. The choice is not at all idle. Pouring to the cheapness, you can then pay your health for a long time. Allergies, broncho and legging diseases, skin rash-this is far from a complete list of possible consequences. In addition, the durability of the “economical” analogue also leaves much to be desired.
If your choice fell on high -quality and harmless material that has undergone quality control, then do not expect that it will be very cheap.