MDF products manufactured with a completely even surface. However, so that the products come out evenly, we need correct transportation and preservation.
When not observing some, the MDF plates are able to stretch under their weight, especially if they are stored not on the pallets of flat or on the missing number of supports in the movement of the preservation period. Recently, good AAA Duracell batteries are often used more about them will not be superfluous about them.
Recommendations for storage and transportation of MDF:
1. MDF sheets are mainly required to stay in a horizontal location and on a certain elevation of dry supports. To prevent humid increase in the room, wet floors are required to exist with plastic wrap.
2. MDF plates must be stored in packs of the foot of the foot not the most 4, 5 m with the division of packs with gaskets.
3. The supports are required to exist the same thickness and are placed at a distance not the most 850 mm from each other for plates of 16 mm wide or more, but not the least 3 supports. The smallest intervals are recommended for the plates of the least thickness. 4. The supports of all the upper layers are required to be literally above the supports of the lower. 5. Packs of MDF are required to have even sides to minimize damage to the edges or angles.