The invention of artificial diamonds and their mass production made it possible to launch various tools with the addition of diamond crumbs. The greatest use in construction was found discs that easily and quickly cut almost any materials.
In a wide range, diamond discs are presented in the online store LLC Delivery Gift. Here you can choose circles for processing asphalt, concrete, ceramic tiles, other materials.
Choice criteria
Before buying a cutting tool, it is necessary to accurately determine some parameters. This will achieve the maximum effect of the use of diamond discs.
The parameters that you need to know:
The diameter of the shaft of the machine and its rotation speed,
disk diameter suitable for this tool,
cutting method (dry, wet),
Properties of the material (hardness, abrasiveness),
The necessary quality of the cut.
When choosing, first of all, pay attention to which car is intended for the car. The diameter of the shaft of the machine must correspond to the diameter of the internal opening of the replaced element (disk). The speed of rotation of the shaft should not exceed the maximum permissible rotation speed, which was indicated by the manufacturer of the circle. The maximum possible thickness of the material depends on the diameter of the disk, which can be cut with its help. The machines are designed for a certain diameter of the used elements used and exceed this indicator is unacceptable. In case of violation of these rules, at best, the diamond circle will work inefficiently, the processed material will be spoiled at the worst or an accident may occur.
For processing building materials, you use dry and wet cutting technology. Disks produced for each method differ in the production method and maximum temperature, to which they can warm up without losing their properties. Circles for dry cutting are produced by laser or dry soldering and they can heat up to significant temperatures. Their use is allowed for wet cutting, provided that constant cooling. Periodic water supply can lead to sharp cooling and disk deformation. Contacked elements for dry cutting are made by silver soldering. Due to the low silver melting temperature, their use is possible exclusively with constant cooling with water. Otherwise, the segments soldered by silver with diamond chips will occur.
What connecting components are used in the production of diamond circles depends on the properties of the processed material. Soft non -abrasive materials (marble) and hard glazed (clinker) can be processed using a circle with soft binders. Solid materials (granite, reinforced concrete) are better cut with a tool with connecting medium rigidity, but the disks with solid binders are designed for abrasive materials (brick, shagon, asphalt).
The quality of the cut depends on the type of circle segments. The most even cut will be at the discs with the complete absence of segments. They are usually used for cutting ceramic tiles and glass. Abrasive materials are better cut by discs with significant segments.
For each type of materials, manufacturers calculated the optimal indicators and developed diamond discs with specific characteristics. It is better to buy special discs for different materials. So you can achieve good cutting results with minimal abrasion of the circle.