To perform the technological process by the education of holes in structures made of concrete, reinforced concrete, brick, stone and other building materials, diamond cutting is used, which helps to do the work carefully. This type of construction work is carried out using certain devices performed on the basis of diamond breeds. Diamond discs, ropes, crowns and chains with the content of diamond segments can be used.
Diamond cutting and its main area of application
Nowadays, it is very widely used in the construction area. The main application is the manufacture of a technological hole in the zone where various types of communications occurs for the arrangement of door and windows.
Especially often used to dismantle part of the structure or its complete disassembly. It is also often used in the work of the manufacture of niches in the walls, both brickwork and concrete structures. The last type of work for which diamond cutting is used is the preparation of the opening in the capital wall or ceiling.
Diamond cutting and technology features
Usually, diamond cutting concrete without dust in a special way. We list some devices that help to carry out the process:
disk or chain benzorer;
A corner for grinding car, which is redone for large diameters and supplied with water cooling.
Extensive use received:
an anx -cutting machine used for a cut to a depth of up to 75 centimeters;
Suture cutter;
car for cutting ropes;
desktop saw;
various specialized tools adapted for diamond discs, chains and ropes.
The history of diamond cutting technology
The very origin of surfaces processing with a diamond tool was founded in Western countries. In Europe, it began to be used in the 60s. With the ubiquitous introduction of reinforced concrete structures, a serious need appeared in the construction world for the work of safe in accordance with the technology for the installation of holes and openings.
In the construction work to break through the openings by the usual method, using the chipping equipment, it becomes possible to get concrete dust into the human body, which causes silicosis. The use of chipping technology causes strong vibration, which is undesirable for the structures of reinforced concrete walls and, especially for a monolithic structure. Another problem is an unpleasant noise that exceeds the level of human perception.
Source: