How to pay less for energy
Saving on heat and electricity begins with the construction of the house. Heating and power supply systems should be designed rationally, for this there are professionals and special literature. The project should not be a piece of paper on which it is drawn, where radiators will stand – it is compiled on the basis of calculations and taking into account the coefficients.
It depends on the chosen diameter of the pipes, at what speed water will flow through them. If the pipes are too narrow, then the flow rate will be insufficient, and the boiler will work with overload, and the radiators will remain cold. With too large diameter of the pipes, the water will flow too quickly, return to the boiler hot, and expensive gas or electricity will begin to be wasted, only to maintain pressure, because the system works due to the difference in temperature.
You can reduce future expenses by correctly calculating the load on the electric network and using saving lamps, light sensors, movement and sound. We do not always need a lamp in the hallway – it can turn off itself, and turn on when a person appears. Energy saving is achieved using competent design of heating and power supply systems.