South Korean brand Shindo specializes in the production of kitchen hoods of various designs and types. The basis of all structures is the heat -resistant glass.
But the main advantage possessed by hoods with glass of this brand is a combination of power with almost silent work. A metal engine is installed in the devices, the fan blades of which are well balanced, which not only significantly reduces noise during operation, but also provides the best capture of contaminated air and its output into the ventilation shaft.
The reasons for the noisy work of shindo hoods
Despite the use of modern technologies, thanks to which it was possible to achieve maximum noiselessness in the operation of hoods, the efficiency of work may decrease, and the noise level increases for a number of reasons. Such reasons are:
Violation of installation technology. The design of these hoods is quite simple, there are all the necessary installation accessories for the extract of 90 in the supply kit, however, non -compliance with the requirements of the installation instructions lead to the fact that this device makes too much noise when working. Such a problem may not occur due to structural flaws of the product, but, for example, in the case of installation of an air duct with a lesser with a diameter. The small diameter of the box or duct creates additional interference with the thrown air, which, running into obstacles and creates some vibration and noise. It should also be borne in mind that when installing a corrugated air vent, more resistance is created for an outflow of air than when using a duct with smooth walls.
Pollution of the fatty aluminum filter. This factor interferes with the free passage of the excitable polluted air into the access channel into the ventilation mine. Additional voltage and vibration of the device is created, which leads to the appearance of severe noise.
Ways to solve the problem of noisy operation of shindo hoods
There are several ways to solve this problem:
Thorough control of the correct installation of hoods. It is best to abandon independent installation and entrust it to specialists, especially since most often this procedure requires the participation of two people.
Timely cleaning of the fatty aluminum filter and all available elements of the hood case according to the instructions, which recommends that for this purpose, use soft, not containing detergents. When using coal filters, they need to replace them with a frequency of 3-4 months.